An excursion funnel is place in front of a button which is our output (which means it needs to be connected to the door here) and a cube is placed on the floor, so when the funnel is activated the cube will press the button. Finally, if both buttons are pressed it's either the SET or the RESET button that wins.ДЄn SR latch can fit in a 1x1x1 cube. If none of the button is pressed the output does not change, it remember its last state. When you press the SET button the output is activated, and when you press the RESET button the output is deactivated. You can be very creative in making your own latches, but here are the most compact versions with the fewest entity.ДЄn SR latch has two inputs, a SET and a RESET button. Like a button that switches a laser field state every time you press it (the action produced by the button, hereВ : enable or disable the field, depends on the field state which is stored in this memory). Latches are useful to create some sort of memory, this way the game can remember thing. Whatever you connect the two outputs to will activate when the panel on that side is down. The outputs can even be used to open the exit door if you want. The outputs can be connected to further logic gates or switches. This will give you an input that can be switched between two or more outputs. The switch can take up a bit of space, but it is relatively simple. The output of the last gate being the final output. You can build a XOR gate with more than 2 inputs by building multiple XOR gate and connecting the output of each gate to one input of the next gate.It can get confusing where your outputs are so it is recommended to use a pit no smaller than 1x2. XOR gates are particularly useful in adders and related circuits, and can be made in a single 1x1 pit.Just an OR gate and a NAND gate connected to the output are needed. It can also be created by adding a NOT gate to the output.ДЄ XOR gate is activated when an odd number of its inputs are activated, most of the time there are only two inputs so the XOR gate is activated when only one of the inputs is activated, or you could say when the inputs are opposite. You can build one by setting the output of the OR gate to start open (for a door) or start enabled. NOR gateДЄ NOR gate is the opposite of an OR gate, it is activated when none of its inputs are activated.

Logic circuit maker